Plugs

A wide range of washers according to ASME standards is available. Purchase washers for fastening and adjustment at competitive prices with delivery to the destination point. Washers are fastening elements in the form of rings installed under nuts or bolts to evenly distribute load and protect surfaces from damage. The catalog includes flat, spring, lock, heavy-duty, and disc washers, designed for operation in various service conditions. They are manufactured from high-quality carbon steel and corrosion-resistant alloys such as Incoloy, Hastelloy, and Alloy grades, ensuring durability and reliability. The products comply with international standards including ASME B18.21.1 (for spring and lock washers) and ASME B18.22.1 (for flat washers), as well as DIN and EN, guaranteeing compatibility with industrial equipment and stable performance in structural assemblies.

Features of flat and lock washers

Flat washers are used to increase the bearing surface under a fastening element and protect the contact surface from damage. They ensure even load distribution and improve the reliability of the joint. ASME lock washers prevent the self-loosening of threaded connections caused by vibration and dynamic loads. Their design includes locking elements such as teeth, tabs, or spring bends. In accordance with ASME B18.21.1, these washers provide dimensional accuracy, load resistance, and compatibility with bolts and nuts used in pipeline systems, power engineering, and mechanical engineering.

Steel washers: properties and applications

Steel washers are among the most common fastening components due to their strength, wear resistance, and versatility. They are manufactured from carbon, alloy, or stainless steel and may have zinc, electroplated, or thermodiffusion coatings to improve corrosion resistance. Such washers are widely used in threaded and flanged connections, pipeline systems, structural assemblies, and heavy industrial equipment.

Steel washers produced according to ASME standards (B18.22.1 for flat washers, B18.21.1 for lock washers) and ASTM standards (for example ASTM F436 for hardened steel washers) ensure reliable load distribution, resistance to high pressures and temperatures, and compatibility with bolts, studs, and nuts in industrial assemblies.

FAQ

1. Which washers are regulated by ASME standards?

ASME B18.22.1 defines dimensions and requirements for flat washers, while ASME B18.21.1 applies to spring and lock washers. These standards guarantee geometric accuracy, compatibility with ASME bolts and nuts, and reliable performance under dynamic and vibration loads.

2. How do ASME washers differ from washers produced under other standards?

ASME washers are standardized in the imperial measurement system, which simplifies integration with American equipment and pipeline systems. They are designed for operation under high pressure and temperature conditions, ensuring uniform load distribution and stable fastening performance even in heavy industry.

3. Where are ASME washers used?

ASME washers are widely applied in the oil and gas, chemical, power generation, and mechanical engineering industries. They are used in pipelines, flange connections, pumps, compressors, and heat exchangers where reliability, corrosion resistance, and durability of fastening assemblies are essential.

Comments

1. What minimum clearance between the washer and the hole is acceptable?

The clearance should generally not exceed 0.3–0.5 mm to ensure uniform load distribution and prevent displacement during tightening.

2. Can a washer be installed between two moving elements?

Only if it serves as a spacer or sliding element and the material is suitable for the expected friction conditions.

3. What additional components can be used with washers to improve reliability?

In some cases, sealing rings, spring washers, and other fastening components are used together to provide comprehensive protection of the joint.